The system DL232-MUX is a multiplexer for 4xRS232 signals, working bidirectionally via fiber optics. Thus, in addition to the RxD and TxD signals, hardware-handshake signals as RTS, CTS, DCD, DSR and DTR can be transferred, too.
RS232-multiplexers have a similar pin assignment as modems. Two multiplexers, connected by fiber optics, cross the wires and operate like a null modem cable.
Hence, connecting two data processing terminals (with PC pin assignment) requires two 1:1 cables to be able to link the terminals to the multiplexers. Terminals with a DCE- pin assignment have to be connected to the multiplexer via a null modem cable.
LEDs and potential-free contacts (optional) of a fault detector relay are able to signal defective states.
Features:
Multiplexer
RS232 signals bi-directional
Software-Handshake or Hardware-Handshake
POF, HCS (PCF), Multimode, Singlemode
RS232 connector 9-pole Sub-D female and 6-pole terminal
FiberView
DIN Rail mounting
–40 °C – +70 °C (Multimode and Singlemode with ST or SC)
Sesjonen din har nå utløpt. Vennligst klikk "OK" for å oppdatere siden og unngå tap av eventuelle ikke-lagrede data. Dersom du var logget inn, må du nå logge inn på nytt.