The QuickServer line of communication gateways are designed to link building automation networks utilizing LonWorks with industrial control networks communicating on BACnet/IP, EtherNet/IP, Modbus TCP/IP, and Modbus RTU. The QuickServer gateways are available with limits of up to 250 or 500 points of application data.

PS-QS-1011-F  supports 500 Points

The gateway is challenging to configure and will require editing the configuration file using spreadsheet programs or any text editor. The configuration file is comma-delimited format (*.csv) where entries within a line are separated by commas and the end of a line is indicated by an entry without a comma. 

Documentation and Downloads

Features and Benefits

• Ability to interface up to 250 or 500 points of common BAS protocols depending on gateway
• Multi-configuration capability; specific configurations selectable via DIP switches or software
• DIN rail mount included with gateway
• DIP switches to select baud rate or node ID on the fly
• BACnet COV support for fast data communication while reducing the traffic over a BACnet network. BTL Marked (PS-QS-1X10-XXXX) and LonMark Certified (PS-QS-1X11-XXXX)

Specifications

Field Connections

• Ethernet 10/100 RJ45
• Serial RS-485 terminal (up to 115K baud)
• FTT-10 LonWorks port

Other

• Configuration/Diagnostic utilities
• Capacity: 250 or 500 Points
• Table, Wall or DIN rail mount

Approvals

• TUV approved to UL 916 standard
• CE Mark
• BTL Mark (PS-QS-1010)
• RoHS Compliant
• FCC Part 15 Compliant

Hardware

Environment

• Operating temperature: -40°F to 167°F (-40°C to 75°C)
• Relative humidity: 5% to 90% RH, with no condensation

Power Requirements

• 9 to 30 Vdc or Vac or 5 Vdc
• Current draw 250mA @ 12V

Physical Dimensions 

• W x D x H: 11.5 x 8.3 x 4.1 cm
• 0.2 Kg