Ensign 3 Hinge Interlock
Produktnummer: 440H-E22038
Produktstatus:
inkl. mva.
Hinge Switch - Ensign 3: Contacts: (Safety/Aux) 2 Normally Closed / 1 Normally Open, BBM Preference: Make Before Break, Actuator Shaft: Length: 80MM Diameter: 10MM-Solid, Conduit Entry: 6-Pin Micro (M12)
Hinge Switch, Ensign 3, No Special Features, 2 N.C. Safety, 1 N.O Aux, 2 N.C. Safety Contacts, Make Before Break, 1 N.O. Auxillary Contact, Solid Hinge Shaft 80mmx10mm, Hinge Switch, 6 Pin AC Micro QD, Plastic
Egenskaper for produkt/familie
- 140;889R-F6ECA-5
- 106 x 25 mm housing
- Fits on 25 mm tubing
- Adjustable cam for changing degree of operation
| Spesifikasjoner | |
|---|---|
| Connection Type | Push in fittings for standard 4 mm diameter nylon tube, internal diameter 2.5 mm |
| Pneumatic Fluid | Compressed air or neutral gas |
| Pressure Range | 2 to 8 Bars |
| Standard | IEC 60947-5-1, ISO 14119, ISOTR 12100 |
| Flow Rate | 138 NL/min. |
| Temperature | 10 to 60 degrees C (50 to 140 degrees F) |
| Mechanical Life | 1,000,000 Operations |
| Product Family | Ensign 3 |
| BBM or MBB | Make Before Break |
| Contacts (Safety/Auxiliary) | 2 Normally Closed / 1 Normally Open |
| Conduit Entry / Connection Type | 6-Pin Micro (M12) |
| Actuator Shaft | Length: 80MM Diameter: 10MM |
| Shaft Type | Solid |
| Cordsets | 889 AC Micro Cable |
| Lengde | 19.558 |
| Høyde | 4.826 |
| Livssyklus | Active |
| Datablad | ||
|---|---|---|
|
Spec Sheet Filnavn: 440h-in001_-en-p.pdf Filtype: application/pdf |
Last ned |
| Nedlastinger | ||
|---|---|---|
|
2-Dimensional Drawing (DXF) Filnavn: ENSIGN_3_440H-E.dwg Filtype: image/vnd.dwg |
Last ned | |
|
Photo Filnavn: 440-Ensign3_PH.jpg Filtype: image/png |
Last ned | |
|
3-Dimensional STEP model (STP) Filnavn: 440H-E%2080mm%20Solid Filtype: application/x-zip-compressed |
Last ned |