Til toppen

Anybus X-gateway IIoT – EtherNet/IP Adapter - OPC UA-MQTT

Produktnummer: AB7554
 

inkl. mva.

The Anybus X-gateway IIoT allows you to seamlessly inter-connect PLC control systems and their connected devices to the IIoT networks MQTT and OPC UA.

Produktet er i limited phase fra og med 26.03.2024.

Limited phase har som regel 12 månder varighet før produktet går over i Exit phase.

Se her for mer informasjon: https://www.anybus.com/technical-support/anybus-product-life-cycle

 

SAFE AND ISOLATED DATA MONITORING

The X-gateway IIoT’s primary function is to allow the fast streaming of an industrial network into OPC UA and MQTT. This offloads your PLC from working with additional services while providing extra security by isolated the high-risk connections away from sensitive areas.  In principle, the PLC gets its own firewall.

Datadirection from server to client. Communication from MQTT / OPC UA in to EtherNet/IP interface is not supported.

EASY CONFIGURATION - NO PROGRAMMING REQUIRED!
The connection between the two networks is quickly set up in the Anybus Configuration Manager software, included with the X-gateway. No programming skills are needed to set up the X-gateway. 

Features and benefits

  • Supports OPC UA micro-embedded profile
  • Supports Discovery Services
  • User name and password authentication
  • Supports DataChange Subscription
  • MQTT client acting as publisher
  • Proven and tested with PLC’s from all leading manufacturers
  • Possibility to build web pages to display and control a factory floor

EtherNet/IP Adapter/Slave interface

EtherNet/IP adapter settings can be made either via the built-in web interface, or by importing the provided .EDS file into engineering tool of the controlling PLC. 

  • EtherNet/IP CONFORMANCE TESTED™ by ODVA 
  • EtherNet/IP Level 2 I/O Server CIP
  • 10/100Mbit operation in full or half-duplex
  • Max. 509 bytes Input and 505 bytes Output data
  • Device Level Ring (DLR) functionality available (announce-based ring participant)
  • Integrated FTP server provides easy file management using standard FTP clients.
  • Web server with dynamic data capability and Server Side Include (SSI) capability
  • Email client with dynamic data capability and Event-triggered email handling
  • Per-user security framework
  • Quality of Service (QoS) available
  • DNS Capability
  • TCP/IP settings via DHCP/ARP/Anybus IPconfig (HICP)
  • Integrated switch allowing for a daisy-chain topology
  • 2x RJ-45 EtherNet/IP ports available simultaneously

OPC UA

  • Support for micro-embedded profile
  • Data direction from server to client
  • Supports Discovery Services
  • Timestamp supported via discovery server
  • User name and password authentication
  • Supports DataChange Subscription
  • Maximum 80 data point tags
  • Dual port cut-through switch
  • Dual RJ-45 ports available simultaneously

MQTT

  • MQTT client acting as publisher
  • MQTT version 3.1.1 supported
  • Json data encoding supported
  • QoS 0-2 supported
  • User name and password authentication
  • Maximum 256 data point tags
  • Dual port cut-through switch
  • Dual RJ-45 ports available simultaneously

TECHNICAL SPECIFICATIONS

Dimensions (L•W•H)   114 x 44 x 127mm or 4,49 x 1,73 x 5,00"
Weight 400g or 0,880 lbs
Operating temperature -25 to +65 °C  or  -13 to +149 °F 
Storage temperature -40 to +85 °C  or  -40 to +185 °F 
Power supply 24 VDC +/- 20% via 2-pole 5.08 mm Phoenix pluggable screw connector  
Current consumption     max. 400mA (Typical 200mA)
Enclosure material  Aluminium and plastic
Installation position Vertical / Flat*
Galvanic isolation YES, on both BUS/Ethernet side
Mechanical rating IP20, NEMA rating 1
Mounting DIN-rail (EN 50022 standard)
I/O configuration via USB port with Anybus Configuration Manager software
Certifications CE, CULUSRoHS